Payment & Shipping Terms:
|Use In:||PCB Home Appliances Light And So On|
Ceramic Wire Wound Power Resistor,
Wire Wound Power Resistor 6.3A,
Non Combustible Coated Thermal Fuse Resistor
Non-Combustible Coated Wire Wound Resistor Pulse Overload Within ±(2%+0.05Ω)
Wirewound Resistors KNR
1,Good heat-durability. low temperature coefficient, low noise, high load power.
2,Operating ambient temperature:-55°C to +275°C.
3,Surface is nonflammable, the 1/4W-6W coating is gray white and indicate the resistance value by color ring, the 7W or over will indicate the resistance value by lettering or coating is green.
4,Resistance tolerance: ±1%, ±2%,±5%,±10%.
Tolerance: ±1%, ±2%,±5%,±10%.
The terminal shall withstand 4 bends of 90°rotation without any breakage or damage, when the Resistor is fixed in vertical position.
Fixing the resistor body, a static load of 2.5Kg is to be gradually applied into the terminal for 10seconds without causing any looseness and fall.
To bend the lead wire at the point of about 6mm from resistor body to 90°,then catch the wire at 1.2±0.4mm apart from the bend point end and turn it (clockwise) by 360 degrees Perpendicular to the resistor axis at speed of sane 5 seconds per turn, and do the same Counterclockwise again which constitute a whole turn. Repeat the turn for 2 times without Causing any break and looseness.
Contact Person: Mag