Resettable 17 AMH PTC Thermal Protector Fuse 6A 250V
|Place of Origin:||CHINA|
|Model Number:||17 AMH+PTC|
Payment & Shipping Terms:
|Minimum Order Quantity:||100 / Negotiable|
|Packaging Details:||Standard carton|
|Delivery Time:||7~10 Working days|
|Payment Terms:||L/C, D/P, T/T,|
|Model Number:||17 AMH+PTC||Usage:||Resettable|
|Breaking Capacity:||Fast||Temperature Range:||55℃~185℃|
|Operating Temperature Tolerance:||±5℃||Durable Action:||10,000 Times|
17 AMH PTC Thermal Protector Fuse,
Thermal Protector Fuse 6A 250V,
17 AMH PTC Resettable Fuses
Temperature Range 55℃~185℃ 6a 250v Thermal Protector Thermostat PTC For Motor Parts
Explanation of Technical Terms
Tf-Rated functioning temperature
The temperature at which a Thermal Cutoff changes its state of conductivity to open circuit detection current. The tolerance according to IEC60691 is from +0 to -10 ̊C.(With Japan Electrical Appliance and Material Law, on the other hand, they must function in the tolerance range of ±7 ̊C.).
The Fusing-off temperature indicates value measured in silicon oil with a temperature increased by 0.5-1 ̊C per minute and a detective current 10mA or less.
The maximum temperature at which a thermal Cutoff will not cause a change in state of conductivity to open circuit while conducting rated current for 168 hours. This rating is required by safety standards based on IEC60691.
Tm-Maximum temperature limit
The maximum temperature at which a Thermal Cutoff can be maintained for 10 minutes without reclosing. This rating is required by safety standards based on IEC60691.
The allowable maximum current which a Thermal Cutoff is able to carry.
The allowable maximum voltage which a Thermal Cutoff is able to applied.
1. Rating Voltage: 250 V
2. Color : Any color is ok
4. High quality and competitive price
5. The open temperature tolerance is ±5 °C,
6. Maximum Contact Rating: 10A 15A/ 250 120VA,
7. The open temperature of YJ001 ranges from 72 °C to 260 °C
8. Lead wire:YJ001 # black; custom-designed calble is also avaiable
Special Note .
1.Our shell sliver thickness is 2 time the normal.
2.The movable electrode is silver alloy,and the common electrode is a silver-plated copper.
3.Lead A and lead B silver plated layer thickness is twice the normal.
4.Epoxy is imported from the USA.
5.Quality control center is the word's most advanced detection method.
Why you should be using 17AMH Thermal Protectors in your product:
*Miniature size ,easy to install
*Individually temperature calibrated and checked.
*Positive make and break with imported snap action bimetal disc.
*Repeatable temperature performance over life
*Gasket steel case suitable for many impregnation processes.
*Both current and temperature sensitivity for maximum design flexibility.
*Wide selection of leads and imported Mylar insulating sleeves.
*Same side or opposite side terminals.
*Strict RoHS environmental standar implemented for each component.
*Cadmium free silver-nickel alloy contacts
*Wide selection of trip off temperatures
*Internal resistance as low as below 50 milliohm
*High temperature resistant lead wire customizable as per customer requirements
*Contact Life:AC120V 30A, AC240V 17A≥6,000 cycles; AC120V 5A≥10,000 cycles.
*Trip off Temperatures:55-180℃
*Reset Temperature:10-45℃ below the trip off temperatures
*Approvals: RoHS, UL, CUL ,VDE