Smaf Series Rectifier Transient Suppression Diode M7f Smd With 2 Pin
|Place of Origin:||CHINA|
Payment & Shipping Terms:
|Minimum Order Quantity:||100 / Negotiable|
|Packaging Details:||Standard carton|
|Delivery Time:||7~10 Working days|
|Payment Terms:||L/C, D/P, T/T,|
|Case:||M7F||Terminals:||Solder Plated, Solderable Per MIL-STD-750|
|Polarity:||As Marked||Mounting Position:||Any|
schottky barrier diode,
high current schottky diode
SMAF Series Rectifier Diodes M7F 2-Pin SMD Diode Transient Voltage Suppressor Diode
The plastic package carries Underwriters Laboratory Flammability Classification 94V-0
For surface mounted applications
Low reverse leakage
Built-in strain relief,ideal for automated placement
High forward surge current capability
High temperature soldering guaranteed:
250°C/10 seconds at terminals Glass passivated chip junction
Case:JEDEC SMAF molded plastic body over passivated chip
Terminals:Solder plated, solderable per MIL-STD-750, Method 2026
Polarity:Color band denotes cathode end
Mounting Position: Any
Weight : 0.0014 ounce, 0.038 grams
Maximum Ratings And Electrical Characteristics
Rating at 25 C ambient temperature unless otherwise specified, Resistive or Inductive load, 60 Hz. For Capacitive load derate current by 20%.
|Maximum repetitive peak reverse voltage||VRRM||50||100||200||400||600||800||1000||V|
|Maximum RMS voltage||VRMS||35||70||140||280||420||560||700||V|
|Maximum DC blocking voltage||VDC||50||100||200||400||600||800||1000||V|
Maximum average forward rectified current at TL=75 C
|Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method)||IFSM||30||A|
Maximum instantaneous forward voltage at 2.0A
Maximum DC reverse current TA=25 C at rated DC blocking voltage TA=100 C
|Typical junction capacitance (NOTE 1)||CJ||15.0||pF|
|Typical thermal resistance (NOTE 2)||RθJA||75.0||℃/W|
|Operating junction and storage temperature range||TJ,TSTG||-65 to +150||℃|
Note:: 1.Measured at 1MHz and applied reverse voltage of 4.0V D.C.
2.P.C.B. mounted with 0.2x0.2”(5.0x5.0mm) copper pad areas
Q: What can i do if i got a broken product form A-TEAM FUSE INC?
A: First of all please tell us as soon as possible after we will send a new one to you immediately but please send the broken product to us .you don't have to worry about the carriage charge we will pay for that.
Q;Are we a importer or manufacturer?
A;We are a manufacturer
Q:Why you have to choose us
A:High quality assurance. The most competitive price and fast shipping
Please tell me:
What product specifications do you need? when you ask for a quotation.I will give you the most competitive price per as your requirements. And we have many types for you to choose.
P.S.:If you can't find any products to meet your requirements. welcome to send us the details drawings so that we can provide us our professional & best service to you.